Requirements for modern forwarding trailers vary greatly depending on the respective area of application. Pfanzelt offers the most extensive range of forwarding trailers on the market. This offers every user the possibility to individually compose the Pfanzelt Profi forwarding trailers for his requirements.
The trailer P15 has an operating load capacity of 13 t and is convincing with its great performance and a professional double telescope forestry crane of the 5 mt-range. The P15 can be optionally equipped with the powerful, hydraulic wheel drive powerDRIVE by Pfanzelt.
The strong frame structure which is based on a torsion-resistant central spar is the basis for the excellent off-road<br/> handling properties of the Pfanzelt forwarding trailer, even when loaded. The central spar is made of fine grain steels to cope with the highest loads. Besides maximum stability, this design offers maximum ground clearance. The central spar has a double wall in the crane mounting plate area to provide the forwarding trailer with additional strength for heavy crane attachments. A second spar is has been welded to the central spar to exacting technical standards.
Frame extension and sliding axle
The flat bed can be extended by up to 2,000 mm for the transport of various timber lengths by means of an integrated, extensible frame. The greatest possible flexibility for loading of the forwarding trailer is also assured by the stanchions whose position can be changed by sliding them along the central spar and the axle bogie. By sliding the axle bogie, heavy loads can be precisely adjusted to the tractor type, thus avoiding the drawbar load being exceeded and also preventing a negative drawbar load.
The bogie axle of Pfanzelt forwarding trailers offers stability during crane operation and the best possible drive characteristics. The large pendulum travel of the bogie axle has a range of up to 394 mm. This enables that the trailer can safely drive over branches and other obstacles. The even distribution of the ground pressure is another big advantage.
Bearings
The bogie axle is mounted on lubricatable and adjustable spherical articulated bearings. This guarantees true running for many years.
Pfanzelt forwarding trailers are equipped as standard with a pivoting draw bar with a large steering angle. The maximum excursion from the centre is +/- 750 mm. Reliable operation even when the loaded rear trailer is turned uphill is assured by two powerful hydraulic cylinders. The pivoting moment is thus 23.6 kNm (at an oil pressure of 200 bar). The steerable draw bar is mechanically locked for on-road driving in the one-man system.
The draw bar of the Profi forwarding trailer is available in both top- and bottom-hitched versions. The bearings of the pivoting draw bar in the form of lubricatable and adjustable spherical articulated bearings ensure long-term operating safety of this component that is subject to heavy loading.
With a hydraulic self-oil supply, the powerful piston pump is, protected from damage, installed either above or below the drawbar in an encapsulated manner.
Pfanzelt Pro forwarding trailers are equipped as standard with a braking system that acts on four wheels. Depending on the trailer size, the braking system is available as a hydraulic or pneumatic system. The compact diaphragm brake cylinders are completely encapsulated with a protective hood. This means that the brake system is protected from damage by branches or the gripper.
Travel on public roads is no problem for Pfanzelt machines, even when loaded. Depending on the equipment, a CoC document is available for 25 km/h.
LED lighting with turn signal monitoring
The lighting system using LED lights is integrated in the frame. To protect the lights when working in the forest, these can be folded in.
uniDRIVE (only P11 and P13)
Pfanzelt's hydraulic wheel drive uniDRIVE sets new standards in the price-performance ratio and is available for Pfanzelt Profi forwarding trailers (P11, P13 and P15).
powerDRIVE
The new hydraulic wheel drive powerDRIVE made by Pfanzeltoffers a new wheel drive dimension. It is convincing in the forest and on the road.
The wheel hub drive is equipped with an electric control unit by which the driver can control the drive from the tractor's cab. This allows the operator to switch between the simple drive for forward travel
and reversing which is automatically switched off during braking and an uphill assist function.
| Type | Thrust | Maximum speed |
| 2WD-I | 2,4 t | 8,8 km/h |
| 2WD-II | 3,1 t | 8,2 km/h |
| 4WD-I | 4,8 t | 4,4 km/h |
| 4WD-II | 6,1 t | 4,1 km/h |
Data depends on hydraulic oil quantity and pressure.
Pfanzelt forestry cranes are designed for professional duty. The Pfanzelt crane range includes loading cranes in various lift classes. All Pfanzelt cranes have a larger lifting force and a higher pivoting moment to enable powerful pivoting of the crane – even uphill.
Click here for technical details
Crane upgrade to double telescope - NEW Cranes 4282/ 5287
| Pro forwarding trailers | P11+ | P13 | P15 | P17 |
|---|---|---|---|---|
| Customize your machine | Configurator | Configurator | Configurator | Configurator |
| Frame construction | Central tube frame | |||
| Central tube size | 200 x 200 x 10 mm | 200 x 200 x 10 mm | 200 x 200 x10 mm | 300 x 200 x10 mm |
| Bogie axle |  | | |
|
| Double walled in crane support zone | – | | |
|
| Frame extension 2,000 mm (mechanically extensible) | | |
|
|
| Long flat bed | 3,800 mm - 5,900 mm | 3,800 mm - 5,900 mm | 3,800 mm - 5,900 mm | 4,500 mm - 6,500 mm |
| Headache rack as per UVV | | | |
|
| Front cage area | 2.12 m² | 2.38 m² | 2.87 m² | 3.52 m² |
| Hydraulic pivoting draw bar with 2 cylinders | | | |
|
| Stanchion pairs | 4 | 4 | 4 | 4 |
| Load capacity on non-public roads | 9 t | 11 t | 13 t | 15 t |
| Permitted total weight on public highways | 11 t | 13 t | 15 t | 17 t |
| Dead weight with crane | approx. 3.3 t | approx. 3.6 t | approx. 4.2 t | approx. 4.5 t |
| Lighting | as per StVZO (German road traffic licensing reg.s), integrated in frame, retractable | |||
| TÜV certification 25 km/h | | | |
|
| Control panel on the draw bar | | | |
|
| Brake system | 2-wheel hydraulic | 4-wheel air brake | 4-wheel air brake | 4-wheel air brake |
| Brake surface | 300 x 90 mm, 8–hole wheel | 300 x 90 mm, 8–hole wheel | 406 x 120 mm, 10–hole wheel | 406 x 120 mm, 10–hole wheel |
| Dimensions | 380/55-17" 14, PR grooved tread | 480/45-17" 14, PR grooved tread | 500/45–22.5" 12, PR stud profile | 600/50– 22.5" 12, PR stud profile |
| Wheel with valve protection | | | – | – |
| Rim flange reinforcement, spar sleeve protection | optional | optional | |
|
| Loading crane | LK 4267 | LK 4272 | LK 5180 | LK 51100 |
| Range | 6,340 mm | 7,140 mm | 8,000 mm | 9,950 mm |
| Lift moment net | 40.5 kNm | 40.5 kNm | 51 kNm | 51 kNm |
| Pivoting moment | 15.2 kNm | 15.2 kNm | 21.5 kNm | 21.5 kNm |
| Crane control | 8-way mechanical, 2 control toggles, 2 electrical functions (rocker) for gripper and telescope | |||
| Clamshell gripper Pm 230 | | | |
|
| Crane inspection and initial acceptance incl. inspection book | | | | |
Accessories | ||||
| 480/45-17" grooved tread, with valve protection | optional |
| – | – |
| 520/50-17" grooved tread, with valve protection | optional | optional | – | – |
| 520/50-17" 159B forestry wheel | – | optional | – | – |
| 560/45–22.5" stud profile, forestry wheel | – | – | optional | optional |
| 600/50–22.5" stud profile, forestry wheel | – | – | optional |
|
| Hydraulic 4-wheel brake | optional | optional | optional | optional |
| 4-wheel overrun brake automatic jolt control | optional | – | – | – |
| 4-wheel air brake | optional |
|
|
|
| Combi brake (air brake and hydraulic 4-wheel brake) | optional | optional | optional | optional |
| uniDRIVE | optional | optional | optional | – |
| powerDRIVE | optional | optional | optional | optional |
| Loading crane 4167 (6,620 mm crane length) | optional | – | – | – |
| Loading crane 4272 (7,140 mm crane length) | optional | | – | – |
Loading crane 4177 (7,550 mm crane length) | optional | optional | – | – |
| Loading crane 5180 (8,000 mm crane length) | optional | optional | – | – |
| Loading crane 5280 (7,800 mm crane length) | optional | optional | – | – |
Loading crane 6180 (8,000 mm crane length) | optional | optional | optional | optional |
Loading crane 6280 (7,800 mm crane length) | optional | optional | optional | – |
Loading crane 4282 double telescope (7.960 mm crane length) | optional | optional | – | – |
Loading crane 5287 double telescope (8,730 mm crane length) | optional | optional | optional | – |
Loading crane 5186 (8,800 mm crane length) | optional | optional | optional | optional |
| Loading crane 5286 (8,600 mm crane length) | optional | optional | optional | optional |
Loading crane 6186 (8,800 mm crane length) | optional | optional | optional | optional |
| Loading crane 6286 (8,600 mm crane length) | optional | optional | optional | optional |
Loading crane 51100 (9,950 mm crane length) | – | – | optional |
|
| Loading crane 61100 (9,950 mm crane length) | – | – | optional | optional |
| Z-Crane Z4389 (5,700 mm crane length) | optional | optional | – | – |
| Z-Crane Z5376 (7,600 mm crane length) | – | optional | optional | optional |
| Z-Crane Z5388 (8,800 mm crane length) | – | optional | optional | optional |
| Independent hydraulic oil supply via piston pump | optional | optional | optional | optional |
| Crane operation via EHC control block with wireless control unit | optional | optional | optional | optional |
| Crane cable winch with wireless control, 1.5 t tractive force | optional | optional | optional | optional |
| Pendulum with concealed hoses | optional | optional | optional | optional |
| Crane operating hours counter | optional | optional | optional | optional |
| Crane floodlights | optional | optional | optional | optional |
| Cut material box | optional | optional | optional | optional |
| Floor pan | optional | optional | optional | optional |
| TÜV 40 km/h | optional | optional | optional | optional |
| Draw bar, bottom hitch | optional | optional | optional | optional |
| Ball hitch | optional | optional | optional | optional |
More information including options and comparable alternatives.
Pfanzelt S-line Rückeanhänger S6
Rückewagen: Kann der Rückeanhänger mit Forstkran P11+ überzeugen?
Pfanzelt Profi Rückeanhänger P15
Pfanzelt logLINE Rückeanhänger L16 | Interview mit einem Forstunternehmer
Pm Trac mit Pfanzelt Profi Rückeanhänger im Einsatz
Pfanzelt S-line Rückeanhänger - forwarding trailers
Pfanzelt Profi Rückeanhänger - forwarding trailers
Pfanzelt logLINE Rückeanhänger - forwarding trailers
Pfanzelt Profi Rückeanhänger
Pfanzelt logLINE Rückeanhänger
Pfanzelt S-line Seilwinden
Pfanzelt S-line Rückewagen | landwirt.com
Pfanzelt logLINE Rückeanhänger | landwirt.com
Pfanzelt S-line Rückeanhänger | landwirt.com
Pfanzelt Profi Rückeanhänger | landwirt.com
