The economical entry level geared rope winch with tractive force of 5.0 t. With a 1,500 mm stacking shield and a low height, this 3-point rope winch is ideal for the smaller tractor.
S-line geared rope winches
S150
Traction in lower rope layer
50 kN
Traction in upper rope layer
40 kN
Serial rope length
Ø 10 mm x 70 m
Pro forestry remote control
Radio system with toggle switch, pushbutton and emergency stop button
Pfanzelt PPS precision controller
✔
Stacking shield width (standard)
1,500 mm
Weight
approx. 510 kg
S-line S160 Edition35
12.300,00 €
S-line geared rope winches
S160 Edition35
Traction in lower rope layer
60 kN
Traction in upper rope layer
47 kN
Serial rope length
Ø 11 mm x 70 m
Pro forestry remote control
Radio system with toggle switch, pushbutton and emergency stop button
Pfanzelt PPS precision controller
✔
Weight
approx 600 kg
Additional equipment Edition 35
Rope distribution and rope infeed brake (with pressure roll) and rope output system
PTB automated drum trailing brake
Shield width 1,800 mm
Special paint finish (shield & unit anthracite)
S-line S160
9.900,00 €
For larger tractors and for users who require more tractive force, the S160 model offers a new, powerful mid-range model in the S-line rope winch range.
S-line geared rope winches
S160
Traction in lower rope layer
60 kN
Traction in upper rope layer
47 kN
Serial rope length
Ø 11 mm x 70 m
Pro forestry remote control
Radio system with toggle switch, pushbutton and emergency stop button
Pfanzelt PPS precision controller
✔
Stacking shield width (standard)
1,500 mm
Weight
approx. 540 kg
S-line S172 Edition35
13.500,00 €
S-line geared rope winches
S172 Edition35
Traction in lower rope layer
72 kN
Traction in upper rope layer
56 kN
Serial rope length
Ø 12 mm x 60 m
Pro forestry remote control
Radio system with toggle switch, pushbutton and emergency stop button
Pfanzelt PPS precision controller
✔
Stacking shield width (standard)
1,800 mm
Weight
approx 630 kg
Additional equipment Edition 35
Rope distribution and rope infeed brake (with pressure roll) and rope output system
PTB automated drum trailing brake
Special paint finish (shield & unit anthracite)
S-line S172
11.250,00 €
The S172 geared rope winch is ideal for larger jobs in communal forests. This rope winch series comes as standard with a 1,800 mm stacking shield.
S-line geared rope winches
S172
Traction in lower rope layer
72 kN
Traction in upper rope layer
56 kN
Serial rope length
Ø 12 mm x 60 m
Pro forestry remote control
Radio system with toggle switch, pushbutton and emergency stop button
Pfanzelt PPS precision controller
✔
Timber blade width (standard)
1,800 mm
Weight
approx. 630 kg
optionlist
Open itemsClose items
Name
Select
Price
PTB automated drum trailing brake
855,00 €
When a rope under tension is released, this often causes untidy winding on the drum. The new PTB automated drum trailing brake automatically brakes the drum in such cases, thus ensuring tidy rope winding. Light and smooth rope payout is guaranteed.
Bevel gear for front and rear installation
845,00 €
Instead of the standard bevel gear, a bevel gear with a second PTO stub with direction of rotation reversal can be provided for front mounting of the winch.
Bottom link tab extension, cat. 2
330,00 €
Load valve via handwheel
370,00 €
Pfanzelt S-line geared rope winches can be equipped with a load lowering valve. This means that a rope under strain can be gradually released and lowered. This is essential in the case of risky tree felling. In order to prevent disruptions, the rope winch operates with a separate oil circuit with filter unit that is fed via a radial piston pump and operates all hydraulic functions.
Electrical motor speed adjustment via servomotor
330,00 €
Retrieval winch
4.200,00 €
Retrieval winch for use on steep slopes
The new auxiliary rope winch for Pfanzelt gear cable winches facilitates roping in demanding terrain. The procedure is simple and effective. It is controlled by the radio system of the cable winch.
Pulling force: 400 kg
Plastic rope
Freewheel for fast rope outout during the arrangement
Automatic unwinding when retracting the forwarding cable
Rope infeed brake
Removable rope drum for easy removal of the material in between
Incl. deflection pulley, tree strap
Anti-tilt system (AKS 2515 Mini_P)
1.015,00 €
Pressure roller, spring-loaded
445,00 €
Rope guide system
Open itemsClose items
Name
Select
Price
Without any rope guide system
0,00 €
Rope distribution and rope infeed brake (with pressure roll)
1.980,00 €
The rope is always kept taut when drawn in, even if the trunk starts to slip or the rope is loose: all made possible by the Pfanzelt rope infeed brake. A cylinder presses the rope when it is drawn in with a brake roller against the brake block. The cylinder force is selected so that the rope can only be pressed against the brake block when it is in an unloaded state. When the rope is paid out, the brake opens completely.
Rope distribution and rope infeed brake (with pressure roll), with long rope package Ø 10 mm x 110 m
2.200,00 €
The rope is always kept taut when drawn in, even if the trunk starts to slip or the rope is loose: all made possible by the Pfanzelt rope infeed brake. A cylinder presses the rope when it is drawn in with a brake roller against the brake block. The cylinder force is selected so that the rope can only be pressed against the brake block when it is in an unloaded state. When the rope is paid out, the brake opens completely.
Rope distribution and rope infeed brake (with pressure roll) and rope output system
3.620,00 €
The Pfanzelt rope output has been developed to increase operating comfort and to improve the rope winding quality. The rope output device built into the pivoting arm of the rope distributor has a mechanical drive and is hydraulically actuated. The rope is thereby pressed against the rope roll via several flexibly mounted pressure rollers over a large radius. The large support surface ensures safe operability even if the rope is soiled or damaged.
Rope distribution and rope infeed brake (with pressure roll), with long rope package Ø 10 mm x 110 m
3.840,00 €
The Pfanzelt rope output has been developed to increase operating comfort and to improve the rope winding quality. The rope output device built into the pivoting arm of the rope distributor has a mechanical drive and is hydraulically actuated. The rope is thereby pressed against the rope roll via several flexibly mounted pressure rollers over a large radius. The large support surface ensures safe operability even if the rope is soiled or damaged.
optionlist
Open itemsClose items
Name
Select
Price
Long rope package Ø 11 mm x 100 m
220,00 €
Bevel gear for front and rear installation
845,00 €
Instead of the standard bevel gear, a bevel gear with a second PTO stub with direction of rotation reversal can be provided for front mounting of the winch.
Load valve via handwheel
370,00 €
Pfanzelt S-line geared rope winches can be equipped with a load lowering valve. This means that a rope under strain can be gradually released and lowered. This is essential in the case of risky tree felling. In order to prevent disruptions, the rope winch operates with a separate oil circuit with filter unit that is fed via a radial piston pump and operates all hydraulic functions.
Retrieval winch
4.200,00 €
Retrieval winch for use on steep slopes
The auxiliary rope winch for Pfanzelt gear cable winches facilitates roping in demanding terrain. The procedure is simple and effective. It is controlled by the radio system of the cable winch.
Pulling force: 400 kg
Plastic rope
Freewheel for fast rope outout during the arrangement
Automatic unwinding when retracting the forwarding cable
Rope infeed brake
Removable rope drum for easy removal of the material in between
Incl. deflection pulley, tree strap
Anti-tilt system (AKS 2515 Mini_P)
1.015,00 €
Electrical motor speed adjustment via servomotor
330,00 €
Bottom link tab extension, cat. 2
330,00 €
Shield width
Open itemsClose items
Name
Select
Price
Shield width 1,800 mm (standard)
0,00 €
Shield width 2,000 mm
585,00 €
Shield width 2,200 mm
855,00 €
optionlist
Open itemsClose items
Name
Select
Price
PTB automated drum trailing brake
855,00 €
When a rope under tension is released, this often causes untidy winding on the drum. The new PTB automated drum trailing brake automatically brakes the drum in such cases, thus ensuring tidy rope winding. Light and smooth rope payout is guaranteed.
Bevel gear for front and rear installation
845,00 €
Instead of the standard bevel gear, a bevel gear with a second PTO stub with direction of rotation reversal can be provided for front mounting of the winch.
Bottom link tab extension, cat. 2
330,00 €
Load valve via handwheel
370,00 €
Pfanzelt S-line geared rope winches can be equipped with a load lowering valve. This means that a rope under strain can be gradually released and lowered. This is essential in the case of risky tree felling. In order to prevent disruptions, the rope winch operates with a separate oil circuit with filter unit that is fed via a radial piston pump and operates all hydraulic functions.
Electrical motor speed adjustment via servomotor
330,00 €
Retrieval winch
4.200,00 €
Retrieval winch for use on steep slopes
The new auxiliary rope winch for Pfanzelt gear cable winches facilitates roping in demanding terrain. The procedure is simple and effective. It is controlled by the radio system of the cable winch.
Pulling force: 400 kg
Plastic rope
Freewheel for fast rope outout during the arrangement
Automatic unwinding when retracting the forwarding cable
Rope infeed brake
Removable rope drum for easy removal of the material in between
Incl. deflection pulley, tree strap
Anti-tilt system (AKS 2515 Mini_P)
1.015,00 €
Pressure roller, spring-loaded
445,00 €
Rope guide system
Open itemsClose items
Name
Select
Price
Without any rope guide system
0,00 €
Rope distribution and rope infeed brake (with pressure roll)
1.980,00 €
The rope is always kept taut when drawn in, even if the trunk starts to slip or the rope is loose: all made possible by the Pfanzelt rope infeed brake. A cylinder presses the rope when it is drawn in with a brake roller against the brake block. The cylinder force is selected so that the rope can only be pressed against the brake block when it is in an unloaded state. When the rope is paid out, the brake opens completely.
Rope distribution and rope infeed brake (with pressure roll), with long rope package Ø 11 mm x 100 m
2.200,00 €
The rope is always kept taut when drawn in, even if the trunk starts to slip or the rope is loose: all made possible by the Pfanzelt rope infeed brake. A cylinder presses the rope when it is drawn in with a brake roller against the brake block. The cylinder force is selected so that the rope can only be pressed against the brake block when it is in an unloaded state. When the rope is paid out, the brake opens completely.
Rope distribution and rope infeed brake (with pressure roll) and rope output system
3.620,00 €
The Pfanzelt rope output has been developed to increase operating comfort and to improve the rope winding quality. The rope output device built into the pivoting arm of the rope distributor has a mechanical drive and is hydraulically actuated. The rope is thereby pressed against the rope roll via several flexibly mounted pressure rollers over a large radius. The large support surface ensures safe operability even if the rope is soiled or damaged.
Rope distribution and rope infeed brake (with pressure roll), with long rope package Ø 11 mm x 100 m
3.840,00 €
The Pfanzelt rope output has been developed to increase operating comfort and to improve the rope winding quality. The rope output device built into the pivoting arm of the rope distributor has a mechanical drive and is hydraulically actuated. The rope is thereby pressed against the rope roll via several flexibly mounted pressure rollers over a large radius. The large support surface ensures safe operability even if the rope is soiled or damaged.
Shield width
Open itemsClose items
Name
Select
Price
Shield width 1,500 mm (standard)
0,00 €
Pfanzelt S-line geared rope winches are equipped with an especially robust stacking shield made of high strength fine grained steel to create a torsion-resistant box. The resulting wedge form is able to reliably absorb even lateral pulling forces, giving many years of robust service. Laterally actuated parking supports ensure that the rope winch can be conveniently attached or removed the tractor, preventing accidents.
Shield width 1,800 mm
545,00 €
Pfanzelt S-line geared rope winches are equipped with an especially robust stacking shield made of high strength fine grained steel to create a torsion-resistant box. The resulting wedge form is able to reliably absorb even lateral pulling forces, giving many years of robust service. Laterally actuated parking supports ensure that the rope winch can be conveniently attached or removed the tractor, preventing accidents.
Shield width 2,000 mm
585,00 €
Pfanzelt S-line geared rope winches are equipped with an especially robust stacking shield made of high strength fine grained steel to create a torsion-resistant box. The resulting wedge form is able to reliably absorb even lateral pulling forces, giving many years of robust service. Laterally actuated parking supports ensure that the rope winch can be conveniently attached or removed the tractor, preventing accidents.
Shield width 2,200 mm
855,00 €
Pfanzelt S-line geared rope winches are equipped with an especially robust stacking shield made of high strength fine grained steel to create a torsion-resistant box. The resulting wedge form is able to reliably absorb even lateral pulling forces, giving many years of robust service. Laterally actuated parking supports ensure that the rope winch can be conveniently attached or removed the tractor, preventing accidents.
optionlist
Open itemsClose items
Name
Select
Price
Long rope package Ø 12 mm x 90 m
270,00 €
Bevel gear for front and rear installation
845,00 €
Instead of the standard bevel gear, a bevel gear with a second PTO stub with direction of rotation reversal can be provided for front mounting of the winch.
Load valve via handwheel
370,00 €
Pfanzelt S-line geared rope winches can be equipped with a load lowering valve. This means that a rope under strain can be gradually released and lowered. This is essential in the case of risky tree felling. In order to prevent disruptions, the rope winch operates with a separate oil circuit with filter unit that is fed via a radial piston pump and operates all hydraulic functions.
Retrieval winch
4.200,00 €
Retrieval winch for use on steep slopes
The auxiliary rope winch for Pfanzelt gear cable winches facilitates roping in demanding terrain. The procedure is simple and effective. It is controlled by the radio system of the cable winch.
Pulling force: 400 kg
Plastic rope
Freewheel for fast rope outout during the arrangement
Automatic unwinding when retracting the forwarding cable
Rope infeed brake
Removable rope drum for easy removal of the material in between
Incl. deflection pulley, tree strap
Anti-tilt system (AKS 2515 Mini_P)
1.015,00 €
Shield width
Open itemsClose items
Name
Select
Price
Shield width 1,800 mm (standard)
0,00 €
Shield width 2,000 mm
585,00 €
Shield width 2,200 mm
855,00 €
optionlist
Open itemsClose items
Name
Select
Price
PTB automated drum trailing brake
855,00 €
When a rope under tension is released, this often causes untidy winding on the drum. The new PTB automated drum trailing brake automatically brakes the drum in such cases, thus ensuring tidy rope winding. Light and smooth rope payout is guaranteed.
Bevel gear for front and rear installation
845,00 €
Instead of the standard bevel gear, a bevel gear with a second PTO stub with direction of rotation reversal can be provided for front mounting of the winch.
Bottom link tab extension, cat. 2
330,00 €
Load valve via handwheel
370,00 €
Pfanzelt S-line geared rope winches can be equipped with a load lowering valve. This means that a rope under strain can be gradually released and lowered. This is essential in the case of risky tree felling. In order to prevent disruptions, the rope winch operates with a separate oil circuit with filter unit that is fed via a radial piston pump and operates all hydraulic functions.
Electrical motor speed adjustment via servomotor
330,00 €
Retrieval winch
4.200,00 €
Retrieval winch for use on steep slopes
The new auxiliary rope winch for Pfanzelt gear cable winches facilitates roping in demanding terrain. The procedure is simple and effective. It is controlled by the radio system of the cable winch.
Pulling force: 400 kg
Plastic rope
Freewheel for fast rope outout during the arrangement
Automatic unwinding when retracting the forwarding cable
Rope infeed brake
Removable rope drum for easy removal of the material in between
Incl. deflection pulley, tree strap
Anti-tilt system (AKS 2515 Mini_P)
1.015,00 €
Pressure roller, spring-loaded
445,00 €
Rope guide system
Open itemsClose items
Name
Select
Price
Without any rope guide system
0,00 €
Rope distribution and rope infeed brake (with pressure roll)
1.980,00 €
The rope is always kept taut when drawn in, even if the trunk starts to slip or the rope is loose: all made possible by the Pfanzelt rope infeed brake. A cylinder presses the rope when it is drawn in with a brake roller against the brake block. The cylinder force is selected so that the rope can only be pressed against the brake block when it is in an unloaded state. When the rope is paid out, the brake opens completely.
Rope distribution and rope infeed brake (with pressure roll), with long rope package Ø 10 mm x 110 m
2.250,00 €
The rope is always kept taut when drawn in, even if the trunk starts to slip or the rope is loose: all made possible by the Pfanzelt rope infeed brake. A cylinder presses the rope when it is drawn in with a brake roller against the brake block. The cylinder force is selected so that the rope can only be pressed against the brake block when it is in an unloaded state. When the rope is paid out, the brake opens completely.
Rope distribution and rope infeed brake (with pressure roll) and rope output system
3.620,00 €
The Pfanzelt rope output has been developed to increase operating comfort and to improve the rope winding quality. The rope output device built into the pivoting arm of the rope distributor has a mechanical drive and is hydraulically actuated. The rope is thereby pressed against the rope roll via several flexibly mounted pressure rollers over a large radius. The large support surface ensures safe operability even if the rope is soiled or damaged.
Rope distribution and rope infeed brake (with pressure roll), with long rope package Ø 12 mm x 90 m
3.890,00 €
The Pfanzelt rope output has been developed to increase operating comfort and to improve the rope winding quality. The rope output device built into the pivoting arm of the rope distributor has a mechanical drive and is hydraulically actuated. The rope is thereby pressed against the rope roll via several flexibly mounted pressure rollers over a large radius. The large support surface ensures safe operability even if the rope is soiled or damaged.
Shield width
Open itemsClose items
Name
Select
Price
Shield width 1,800 mm (standard)
0,00 €
Pfanzelt S-line geared rope winches are equipped with an especially robust stacking shield made of high strength fine grained steel to create a torsion-resistant box. The resulting wedge form is able to reliably absorb even lateral pulling forces, giving many years of robust service. Laterally actuated parking supports ensure that the rope winch can be conveniently attached or removed the tractor, preventing accidents.
Shield width 2,000 mm
585,00 €
Pfanzelt S-line geared rope winches are equipped with an especially robust stacking shield made of high strength fine grained steel to create a torsion-resistant box. The resulting wedge form is able to reliably absorb even lateral pulling forces, giving many years of robust service. Laterally actuated parking supports ensure that the rope winch can be conveniently attached or removed the tractor, preventing accidents.
Shield width 2,200 mm
855,00 €
Pfanzelt S-line geared rope winches are equipped with an especially robust stacking shield made of high strength fine grained steel to create a torsion-resistant box. The resulting wedge form is able to reliably absorb even lateral pulling forces, giving many years of robust service. Laterally actuated parking supports ensure that the rope winch can be conveniently attached or removed the tractor, preventing accidents.
Select accessory positions according to your own needs
"Request quote" to save the configuration
You now have the option of having a quote sent to you or of sending the machine you want by email. Your quote will be transferred directly to Pfanzelt-Maschinenbau and processed shortly.
Any questions? Call us on +49 8860 9217 0.
Pfanzelt Maschinenbau wishes you a lot of fun with the configuration
