Please note: For orders from May 1st, 2021 a surcharge of 4 % applies.
Model
Name
Select
Price
S-line S6 with loading crane 2764
15.990,00 €
S-line forwarding trailers
S6
Frame structure
Bolted double frame
Bogie axle
Guard grid surface
1.40 m²
Long flat bed
3,500 mm
Hydraulic pivoting draw bar with 2 cylinders
Stanchion pairs
3 + 1
Payload on private roads
6 t
Permitted total weight on public highways
6 t
Empty weight with crane
approx. 1.7 t
Lighting integrated in frame, retractable
Operating station on draw bar
Brake system
2-wheel hydrl.
Brake surface
300 x 60 mm - 6-hole rim
Tyres
380/55-17" 14 PR, grooved tread
Rim with valve protection
Loading crane
LK 2764
Reach
6,200 mm
Net lifting torque
27 kNm
Pivoting torque
10.4 kNm
Crane control
8-way mechanical, 2 control toggles, 2 electrical functions (rocker) for gripper and telescope
Clamshell gripper
Pm 150
S-line S9
23.700,00 €
S-line forwarding trailers
S9
Frame structure
Double frame U-profile in special steel
Bogie axle
Headache rack area
1.92 m²
Long flat bed
4,000 mm
Hydraulic pivoting draw bar with 2 cylinders
Stanchion pairs
4
Payload on private roads 14.0 t
9.2 t
Permissible gross weight on public roads up to 9,2 t
Empty weight with crane
approx. 2,97 t
Lighting integrated in frame, retractable
TÜV certification 35 km/h
Operating station on draw bar
Brake system
2-wheel hydrl.
Brake surface
300 x 90 mm - 8-hole wheel
Tyres
380/55-17" 14 PR grooved tread
Rim with valve protection
Loading crane
LK 4267
Reach
6,370 mm
Net lifting torque
40.5 kNm
Pivoting moment
15.2 kNm
Crane control
8-way mechanical, 2 control toggles, 2 electrical functions (rocker) for gripper and telescope
Clamshell gripper
Pm 230
optionlist
Open itemsClose items
Name
Select
Price
Cut material box (installation height up to stanchion top edge)
1.910,00 €
The hot-dip galvanised cut material floor pan is designed for transporting branch and cut material.
Independent oil supply with fixed piston pump (63 ltr.)
1.970,00 €
For carrier vehicles with low hydraulic power and when various tractors are pooled, Pfanzelt cranes can be equipped with an independent hydraulic system – safe and fuel saving oil supply is thus assured. The oil supply tank is neatly integrated in the A-column support, avoiding field of vision restrictions.
Crane rope winch
2.990,00 €
Brake system
Open itemsClose items
Name
Select
Price
2-wheel hydraulic brake system (serie)
0,00 €
2-wheel overrun brake
1.950,00 €
optionlist
Open itemsClose items
Name
Select
Price
TÜV-Abnahme 40 km/h
990,00 €
inkl. Radabdeckung schnellwechselbar (Mehrpreis) - Deutschland
Fahrten auf öffentlichen Straßen sind auch mit Beladung bei Pfanzelt problemlos möglich. Mit der TÜV-Abnahme kann der Rückeanhänger für Straßenfahrten mit 25 oder 40 km/h zugelassen werden.
Für die 40 km/h Zulassung muss der Rückeanhänger mit einer hydraulischen Auflaufbremse oder einer Druckluftbremse ausgestattet sein.
Cut material box
2.480,00 €
Installation height up to stanchion top edge
The hot-dip galvanised cut material floor pan is designed for transporting branch and cut material.
Floor pan
2.480,00 €
Floor pan (installation height up to second stanchion radius)
The floor pan is suitable for the combined transport of logs and branch material.
Drive system uniDRIVE
6.290,00 €
Oil supply via crank circuit with electrohydraulic control Possible for tyres as of 480/45-17".
The new Pfanzelt uniDRIVE hydraulic wheel drive sets new standards in terms of price/performance ratio and is available for Pfanzelt trailers (S9, S11, P11 und P13).
Maximum thrust per wheel up to 2 t
Maximum speed up to 8 km/h
Hydraulic supply via independent hydraulic oil supply or hydraulic system of the tractor
No wear when driving on-road at full speed
Use of anti-skid chains possible
Round bale loading trailer platform
2.480,00 €
Kit with assembly instructions.
The round bale loading trailer enables easy loading and transport of round bales. Special gripper attachments simplify the handling of round bales.
4-finger gripper
790,00 €
Instead of clamshell gripper (standard) - 1,260 mm opening width
The 4-finger gripper ensures easy loading of branches and cut wood.
For carrier vehicles with low hydraulic power and when various tractors are pooled, Pfanzelt cranes can be equipped with an independent hydraulic system – safe and fuel saving oil supply is thus assured. The oil supply tank is neatly integrated in the A-column support, avoiding field of vision restrictions.
Pendulum with internal concealed hoses
720,00 €
The hydraulic hoses run from the control block to the crane tip so as they are protected, ensuring low downtimes and the highest degree of safety. Pfanzelt therefore attaches the highest priority to ensuring that the hydraulic hoses are protected over the entire crane by being concealed (internal routing). At points of high physical loading, the hoses are laid in a hose shaft . Additional rotary cutouts increase the service life of the hydraulic hoses. To increase operator safety, the hoses are also routed through a hose shaft in the vicinity of the control stand.
The telescopic cylinder is also internally mounted, protecting it from damage during crane work.
The optionally available pendulum with internally laid hydraulic hoses enables protection right up to the crane tip. This is also equipped with a double pendulum brake.
Crane rope winch 2.0 exTEND
2.990,00 €
The new crane rope winch exTEND offers a greater comfort and safety.
Tractive force 1.5 t, rope capacity 50 m
Pro forestry remote control
Simple switching option between hydraulic freewheel and forward and return
Mechanical drum brake
Parking supports, 300 x 300 mm (pair)
300,00 €
Crane operating hours counter
330,00 €
The operating hours counter records the hours in which the loading crane is service. This is especially useful if the forwarding trailer is shared by several users or is hired out.
LED flood light in folding arm with floodlight protection
390,00 €
Gripper attachment for round bales
850,00 €
Ball head hitch K80
0,00 €
Draw bar, bottom hitch
0,00 €
Tyres
Open itemsClose items
Name
Select
Price
Tyres 380/55-17" 14 PR, grooved tread (serie)
0,00 €
Tyres 480/45-17" PR, grooved tread
980,00 €
Tyres 520/50-17" 14 PR, grooved tread
1.940,00 €
Tyres 520/50-17" 14 PR, stud tread, forestry rim
2.540,00 €
Brake system
Open itemsClose items
Name
Select
Price
2-wheel hydraulic brake system (serie)
0,00 €
4-wheel hydraulic brake system
890,00 €
4-wheel hydraulic brake system
890,00 €
4-wheel hydraulic brake system with load conrol valve
1.470,00 €
Hitch rupture brake
1.060,00 €
Overrun brake with automatic jolt control (permitted max. weight 8 t)
2.950,00 €
4-wheel pneumatic brake system
2.740,00 €
Crane control
Open itemsClose items
Name
Select
Price
2 control toggles with 2 electrical functions (stadard)
0,00 €
The highest performance is achieved when the controls are perfectly ergonomic. In addition to the operating position, this is also determined by the crane controller. All Pfanzelt forestry cranes are fitted as standard with a mechanical control block, 2 control toggles and an electrical switch. This means that the individual boom movements can be easily and rapidly coordinated, without having to reach for different control levers or turning.
EHC crane control with 2 joysticks (Danfoss)
8.650,00 €
The crane can also be controlled via two separate toggle switches that are installed on a rotary seat in the tractor on at a control desk. The two Profi 1 joysticks from Danfoss allow very precise, ergonomic control.
EHC crane control with wireless control panel (Danfoss PVG 32)
8.750,00 €
In addition to a mechanical crane control, the crane can also be operated via an EHC controller with a cord or wireless control panel.
Select accessory positions according to your own needs
"Request quote" to save the configuration
You now have the option of having a quote sent to you or of sending the machine you want by email. Your quote will be transferred directly to Pfanzelt-Maschinenbau and processed shortly.
Any questions? Call us on +49 8860 9217 0.
Pfanzelt Maschinenbau wishes you a lot of fun with the configuration