Name | Select | Price |
---|---|---|
Cut material box | 3.290,00 € | |
Installation height up to stanchion top edge |
||
Floor pan | 3.290,00 € | |
Floor pan (installation height up to second stanchion radius)
|
||
Stanchion pair without carrier | 690,00 € | |
Stanchion pair with carrier | 1.210,00 € | |
Ball head hitch K80 | 0,00 € | |
Draw bar, bottom hitch | 0,00 € | |
Stanchion extension 200 mm | 430,00 € | |
1 set = 8 pcs |
||
4-finger gripper | 1.000,00 € | |
Instead of clamshell gripper (standard) - 1,260 mm opening width
|
||
Parking supports, 300 x 300 mm (pair) | 415,00 € | |
Pendulum with internal concealed hoses | 900,00 € | |
The hydraulic hoses run from the control block to the crane tip so as they are protected, ensuring low downtimes and the highest degree of safety. Pfanzelt therefore attaches the highest priority to ensuring that the hydraulic hoses are protected over the entire crane by being concealed (internal routing). At points of high physical loading, the hoses are laid in a hose shaft<br/> . Additional rotary cutouts increase the service life of the hydraulic hoses.<br/> To increase operator safety, the hoses are also routed through a hose shaft in the vicinity of the control stand. The telescopic cylinder is also internally mounted, protecting it from damage during crane work. The optionally available pendulum with internally laid hydraulic hoses enables protection right up to the crane tip. This is also equipped with a double pendulum brake.
|
||
Hydraulic oil cooler with electric fan | 1.840,00 € | |
Crane rope winch 2.0 exTEND | 3.770,00 € | |
If the crane's reach is not long enough, the crane winch can be used to pull the material to be lifted closer. The new crane rope winch exTEND offers a greater comfort and safety.
|
||
Crane operating hours counter | 420,00 € | |
The operating hours counter records the hours in which the loading crane is service. This is especially useful if the forwarding trailer is shared by several users or is hired out. |
||
Trunk scraper on main boom | 480,00 € | |
A trunk scraper facilitates loading work with the forestry crane, especially with long sections or very long treetop material. The scraper is mounted on the main boom of the crane. |
||
LED flood light in folding arm | 490,00 € | |
Two LED flood light on crane column with floodlight protection | 1.150,00 € | |
Load sensing connection for Danfoss control block | 290,00 € | |
Package MAX (Loading cross section 2,38 m² and as well as adapted stanchions) | 1.990,00 € |
Name | Select | Price |
---|---|---|
Tyres 380/55-17" 14 PR, grooved tread (serie) | 0,00 € | |
Tyres 480/45-17" PR, grooved tread | 1.240,00 € | |
Tyres 500/55-17" Alliance Forestry, forestry rim | 3.910,00 € | |
Tyres 520/50-17" 14 PR, grooved tread | 2.440,00 € |
Name | Select | Price |
---|---|---|
2-wheel hydraulic brake system (serie) | 0,00 € | |
4-wheel hydraulic brake system | 1.120,00 € | |
Overrun brake with automatic jolt control (permitted max. weight 8 t) | 3.460,00 € | |
4-wheel pneumatic brake system | 3.460,00 € |
Name | Select | Price | ||||||
---|---|---|---|---|---|---|---|---|
Without drive system | 0,00 € | |||||||
uniDRIVE | 7.920,00 € | |||||||
Only possible for 17” tyres and forestry rim - not in combination with overrun brake Oil supply via crank circuit with electrohydraulic control. The new Pfanzelt uniDRIVE hydraulic wheel drive sets new standards in terms of price/performance ratio.
|
||||||||
powerDRIVE 2WD-I with 2,4 t thrust force | 15.200,00 € | |||||||
The hydraulic wheel hub drive powerDRIVE made by Pfanzelt offers a new dimension in terms of wheel hub drives.
Declarations depending on hydraulic oil volume and hydraulic oil pressure.
|
||||||||
powerDRIVE 4WD-I with 4,8 t thrust force | 26.500,00 € | |||||||
The hydraulic wheel hub drive powerDRIVE made by Pfanzelt offers a new dimension in terms of wheel hub drives.
Declarations depending on hydraulic oil volume and hydraulic oil pressure.
|
Name | Select | Price |
---|---|---|
2 control toggles with 2 electrical functions (stadard) | 0,00 € | |
The highest performance is achieved when the controls are perfectly ergonomic. In addition to the operating position, this is also determined by the crane controller. All Pfanzelt forestry cranes are fitted as standard with a mechanical control block, 2 control toggles and an electrical switch. This means that the individual boom movements can be easily and rapidly coordinated, without having to reach for different control levers or turning.
|
||
EHC crane control with 2 joysticks (Danfoss) | 10.900,00 € | |
The crane can also be controlled via two separate toggle switches that are installed on a rotary seat in the tractor on at a control desk.<br/> The two Profi 1 joysticks from Danfoss allow very precise, ergonomic control. |
||
EHC crane control with wireless control panel (Danfoss PVG 32) | 10.900,00 € | |
In addition to a mechanical crane control, the crane can also be operated via an EHC controller with a cord or wireless control panel. |
Name | Select | Price |
---|---|---|
Without independet oil circuit (standard) | 0,00 € | |
Independent oil supply with fixed piston pump (63 ltr.) | 4.330,00 € | |
Hydraulic oil cooler included if equipped with own oil supply 108 Liter, 200 bar |
||
Independent oil supply with fixed load-sensing pump | 6.980,00 € | |
Hydraulic oil cooler included if equipped with own oil supply 117 Liter, 230 bar |
Name | Select | Price | Loading crane 4267 | 0,00 € |
---|---|---|
Loading crane 4167 | 0,00 € | |
Loading crane 4272 | 2.230,00 € | |
Loading crane 4177 | 2.230,00 € | |
Loading crane 5180 | 8.630,00 € | |
Loading crane 5280 | 8.630,00 € | |
Loading crane 6180 | 10.440,00 € | |
Loading crane 6280 | 10.440,00 € | |
Loading crane 4282 | 4.710,00 € | |
Loading crane 5287 | 9.020,00 € | |
Loading crane 5186 | 10.700,00 € | |
Loading crane 5286 | 10.700,00 € | |
Loading crane 6186 | 12.500,00 € | |
Loading crane 6286 | 12.500,00 € |
Name | Select | Price |
---|---|---|
Stanchion extension 200 mm | 430,00 € | |
1 set = 8 pcs |
||
Stanchion pair without carrier | 710,00 € | |
Stanchion pair with carrier | 1.230,00 € | |
Combination brake 4-wheel pneumatic and hydraulic 2-wheel brake | 1.120,00 € | |
Instead of standard pneumatic brake |
||
Cut material box | 3.430,00 € | |
Installation height up to stanchion top edge |
||
Floor pan | 3.430,00 € | |
Floor pan (installation height up to second stanchion radius.) |
||
Draw bar, bottom hitch | 0,00 € | |
Ball head hitch K80 | 0,00 € | |
4-finger gripper | 1.000,00 € | |
Instead of clamshell gripper (standard) - 1,260 mm opening width |
||
Parking supports, 300 x 300 mm (pair) | 415,00 € | |
Pendulum with internal concealed hoses | 900,00 € | |
The hydraulic hoses run from the control block to the crane tip so as they are protected, ensuring low downtimes and the highest degree of safety. Pfanzelt therefore attaches the highest priority to ensuring that the hydraulic hoses are protected over the entire crane by being concealed (internal routing). At points of high physical loading, the hoses are laid in a hose shaft<br/> . Additional rotary cutouts increase the service life of the hydraulic hoses.<br/> To increase operator safety, the hoses are also routed through a hose shaft in the vicinity of the control stand. The telescopic cylinder is also internally mounted, protecting it from damage during crane work. The optionally available pendulum with internally laid hydraulic hoses enables protection right up to the crane tip. This is also equipped with a double pendulum brake.
|
||
Hydraulic oil cooler with electric fan | 1.840,00 € | |
Crane rope winch 2.0 exTEND | 3.770,00 € | |
If the crane's reach is not long enough, the crane winch can be used to pull the material to be lifted closer. The new crane rope winch exTEND offers a greater comfort and safety.
|
||
Crane operating hours counter | 420,00 € | |
The operating hours counter records the hours in which the loading crane is service. This is especially useful if the forwarding trailer is shared by several users or is hired out. |
||
Trunk scraper on main boom | 480,00 € | |
A trunk scraper facilitates loading work with the forestry crane, especially with long sections or very long treetop material. The scraper is mounted on the main boom of the crane. |
||
LED flood light in folding arm | 490,00 € | |
Two LED flood light on crane column with floodlight protection | 1.150,00 € |
Name | Select | Price |
---|---|---|
Tyres 480/45-17" PR, grooved tread (standard) | 0,00 € | |
Tyres 500/45-22,5" tyres, stud tread | 3.570,00 € | |
Tyres 500/55-17" Alliance Forestry, forestry rim | 2.670,00 € | |
Tyres 520/50-17" 14 PR, grooved tread | 1.200,00 € | |
Tyres 520/50-17" tyres, stud tread, rim protection | 1.910,00 € | |
Tyres 560/45-22,5“ tyres, stud tread | 4.130,00 € |
Name | Select | Price | ||||||
---|---|---|---|---|---|---|---|---|
Without drive system | 0,00 € | |||||||
uniDRIVE | 7.920,00 € | |||||||
Oil supply via crank circuit with electrohydraulic control. Possible for tyres as of 480/45-17" and forestry rim. The Pfanzelt uniDRIVE hydraulic wheel drive sets new standards in terms of price/performance ratio.
|
||||||||
powerDRIVE 2WD-I with 2,4 t thrust force | 15.200,00 € | |||||||
The hydraulic wheel hub drive powerDRIVE made by Pfanzelt offers a new dimension in terms of wheel hub drives.
Declarations depending on hydraulic oil volume and hydraulic oil pressure.
|
||||||||
powerDRIVE 4WD-I with 4,8 t thrust force | 26.500,00 € | |||||||
The hydraulic wheel hub drive powerDRIVE made by Pfanzelt offers a new dimension in terms of wheel hub drives.
Declarations depending on hydraulic oil volume and hydraulic oil pressure.
|
Name | Select | Price |
---|---|---|
2 control toggles with 2 electrical functions (stadard) | 0,00 € | |
The highest performance is achieved when the controls are perfectly ergonomic. In addition to the operating position, this is also determined by the crane controller. All Pfanzelt forestry cranes are fitted as standard with a mechanical control block, 2 control toggles and an electrical switch. This means that the individual boom movements can be easily and rapidly coordinated, without having to reach for different control levers or turning.
|
||
EHC crane control with 2 joysticks (Danfoss) | 10.900,00 € | |
The crane can also be controlled via two separate toggle switches that are installed on a rotary seat in the tractor on at a control desk.<br/> The two Profi 1 joysticks from Danfoss allow very precise, ergonomic control. |
||
EHC crane control with wireless control panel (Danfoss PVG 32) | 10.900,00 € | |
In addition to a mechanical crane control, the crane can also be operated via an EHC controller with a cord or wireless control panel. |
Name | Select | Price |
---|---|---|
Without independet oil circuit (standard) | 0,00 € | |
Independent oil supply with fixed piston pump | 4.330,00 € | |
Hydraulic oil cooler included if equipped with own oil supply 108 Liter, 200 bar |
||
Independent oil supply with fixed load-sensing pump | 6.980,00 € | |
Hydraulic oil cooler included if equipped with own oil supply 117 Liter, 230 bar |
Name | Select | Price | Loading crane 4272 | 0,00 € |
---|---|---|
Loading crane 4177 | 0,00 € | |
Loading crane 5180 | 6.400,00 € | |
Loading crane 5280 | 6.400,00 € | |
Loading crane 6180 | 8.170,00 € | |
Loading crane 6280 | 8.170,00 € | |
Loading crane 4282 | 2.490,00 € | |
Loading crane 5287 | 6.790,00 € | |
Loading crane 5186 | 8.480,00 € | |
Loading crane 5286 | 8.480,00 € | |
Loading crane 6186 | 10.300,00 € | |
Loading crane 6286 | 10.300,00 € | |
Add-on crane Z5376 | 8.490,00 € | |
Add-on crane Z5388 | 10.250,00 € |
Name | Select | Price |
---|---|---|
Stanchion pair with carrier | 1.360,00 € | |
Combination brake 4-wheel pneumatic and hydraulic 2-wheel brake | 2.240,00 € | |
Instead of standard pneumatic brake |
||
Cut material box | 3.430,00 € | |
Installation height up to stanchion top edge |
||
Floor pan | 3.430,00 € | |
Floor pan (installation height up to second stanchion radius.) |
||
Stanchion extension 200 mm | 430,00 € | |
1 set = 8 pcs |
||
Stanchion pair without carrier | 860,00 € | |
Draw bar, bottom hitch | 0,00 € | |
Ball head hitch K80 | 0,00 € | |
Telescope stabiliser H-form | 6.740,00 € | |
incl. 2 control valves - surcharge instead of A-form As well as A-column support, the accessories range includes H-column support. The wider bearing surface ensures even greater stability. |
||
4-finger gripper | 1.000,00 € | |
Instead of clamshell gripper (standard) - 1,260 mm opening width |
||
Parking supports, 300 x 300 mm (pair) | 415,00 € | |
Pendulum with internal concealed hoses | 900,00 € | |
The hydraulic hoses run from the control block to the crane tip so as they are protected, ensuring low downtimes and the highest degree of safety. Pfanzelt therefore attaches the highest priority to ensuring that the hydraulic hoses are protected over the entire crane by being concealed (internal routing). At points of high physical loading, the hoses are laid in a hose shaft<br/> . Additional rotary cutouts increase the service life of the hydraulic hoses.<br/> To increase operator safety, the hoses are also routed through a hose shaft in the vicinity of the control stand. The telescopic cylinder is also internally mounted, protecting it from damage during crane work. The optionally available pendulum with internally laid hydraulic hoses enables protection right up to the crane tip. This is also equipped with a double pendulum brake.
|
||
Hydraulic oil cooler with electric fan | 1.840,00 € | |
Crane rope winch 2.0 exTEND | 3.770,00 € | |
If the crane's reach is not long enough, the crane winch can be used to pull the material to be lifted closer. The new crane rope winch exTEND offers a greater comfort and safety.
|
||
Crane operating hours counter | 420,00 € | |
The operating hours counter records the hours in which the loading crane is service. This is especially useful if the forwarding trailer is shared by several users or is hired out. |
||
Trunk scraper on main boom | 480,00 € | |
A trunk scraper facilitates loading work with the forestry crane, especially with long sections or very long treetop material. The scraper is mounted on the main boom of the crane. |
||
LED flood light in folding arm | 490,00 € | |
Two LED flood light on crane column with floodlight protection | 1.150,00 € | |
Load sensing connection for Danfoss control block | 290,00 € |
Name | Select | Price |
---|---|---|
Tyres rear 500/45-22,5 12 PR stud tread (standard) | 0,00 € | |
Tyres 560/45-22,5“ tyres, stud tread | 1.240,00 € | |
Tyres 600/50-22,5“ tyres, stud tread | 2.620,00 € |
Name | Select | Price | ||||||
---|---|---|---|---|---|---|---|---|
Without drive system | 0,00 € | |||||||
uniDRIVE | 7.920,00 € | |||||||
Only possible for 22,5 “ tyres with forestry rim. Oil supply via crank circuit with electrohydraulic control. The Pfanzelt uniDRIVE hydraulic wheel drive sets new standards in terms of price/performance ratio.
|
||||||||
powerDRIVE 2wd-II with 3,1 t thrust force | 17.500,00 € | |||||||
The hydraulic wheel hub drive powerDRIVE made by Pfanzelt offers a new dimension in terms of wheel hub drives.
Declarations depending on hydraulic oil volume and hydraulic oil pressure. |
||||||||
powerDRIVE 4WD-II with 6,1 t thrust force | 28.800,00 € | |||||||
The hydraulic wheel hub drive powerDRIVE made by Pfanzelt offers a new dimension in terms of wheel hub drives.
Declarations depending on hydraulic oil volume and hydraulic oil pressure. |
Name | Select | Price |
---|---|---|
2 control toggles with 2 electrical functions (stadard) | 0,00 € | |
The highest performance is achieved when the controls are perfectly ergonomic. In addition to the operating position, this is also determined by the crane controller. All Pfanzelt forestry cranes are fitted as standard with a mechanical control block, 2 control toggles and an electrical switch. This means that the individual boom movements can be easily and rapidly coordinated, without having to reach for different control levers or turning.
|
||
EHC crane control with 2 joysticks (Danfoss 8 functions) | 10.900,00 € | |
The crane can also be controlled via two separate toggle switches that are installed on a rotary seat in the tractor on at a control desk.<br/> The two Profi 1 joysticks from Danfoss allow very precise, ergonomic control. |
||
EHC crane control with wireless control panel (Danfoss PVG 32) | 10.900,00 € | |
In addition to a mechanical crane control, the crane can also be operated via an EHC controller with a cord or wireless control panel. |
||
EHC crane control with 2 joysticks (Danfoss 10 functions) | 13.000,00 € |
Name | Select | Price |
---|---|---|
Without independet oil circuit (standard) | 0,00 € | |
Independent oil supply with fixed piston pump | 4.330,00 € | |
Hydraulic oil cooler included if equipped with own oil supply 108 Liter, 200 bar |
||
Independent oil supply with fixed load-sensing pump | 6.980,00 € | |
Hydraulic oil cooler included if equipped with own oil supply 117 Liter, 230 bar |
Name | Select | Price | Loading crane 5180 | 0,00 € |
---|---|---|
Loading crane 6180 | 1.760,00 € | |
Loading crane 6280 | 1.760,00 € | |
Loading crane 5287 | 390,00 € | |
Loading crane 5186 | 2.080,00 € | |
Loading crane 5286 | 2.080,00 € | |
Loading crane 6186 | 3.860,00 € | |
Loading crane 6286 | 3.860,00 € | |
Loading crane 51100 | 3.860,00 € | |
Add-on crane Z5376 | 760,00 € | |
Add-on crane Z5388 | 3.850,00 € |
Name | Select | Price |
---|---|---|
Combination brake 4-wheel pneumatic and hydraulic 2-wheel brake | 2.530,00 € | |
Instead of standard pneumatic brake |
||
Cut material box | 4.480,00 € | |
Installation height up to stanchion top edge |
||
Floor pan | 4.480,00 € | |
Floor pan (installation height up to second stanchion radius.) |
||
Stanchion pair with carrier | 1.600,00 € | |
Stanchion extension 200 mm | 480,00 € | |
1 set = 8 pcs |
||
Stanchion pair without carrier | 1.040,00 € | |
Draw bar hitch at top instead of bottom | 0,00 € | |
Without ball head suspension K80 for forwarding trailer | 0,00 € | |
Telescope stabiliser H-form | 7.670,00 € | |
incl. 2 control valves - surcharge instead of A-form As well as A-column support, the accessories range includes H-column support. The wider bearing surface ensures even greater stability. |
||
Parking supports, 300 x 300 mm (pair) | 460,00 € | |
Pendulum with internal concealed hoses | 1.020,00 € | |
The hydraulic hoses run from the control block to the crane tip so as they are protected, ensuring low downtimes and the highest degree of safety. Pfanzelt therefore attaches the highest priority to ensuring that the hydraulic hoses are protected over the entire crane by being concealed (internal routing). At points of high physical loading, the hoses are laid in a hose shaft<br/> . Additional rotary cutouts increase the service life of the hydraulic hoses.<br/> To increase operator safety, the hoses are also routed through a hose shaft in the vicinity of the control stand. The telescopic cylinder is also internally mounted, protecting it from damage during crane work. The optionally available pendulum with internally laid hydraulic hoses enables protection right up to the crane tip. This is also equipped with a double pendulum brake. |
||
Hydraulic oil cooler with electric fan | 2.070,00 € | |
Crane rope winch 2.0 exTEND | 4.250,00 € | |
If the crane's reach is not long enough, the crane winch can be used to pull the material to be lifted closer. The new crane rope winch exTEND offers a greater comfort and safety.
|
||
Crane operating hours counter | 480,00 € | |
The operating hours counter records the hours in which the loading crane is service. This is especially useful if the forwarding trailer is shared by several users or is hired out. |
||
Trunk scraper on main boom | 550,00 € | |
A trunk scraper facilitates loading work with the forestry crane, especially with long sections or very long treetop material. The scraper is mounted on the main boom of the crane. |
||
LED flood light in folding arm | 560,00 € | |
Two LED flood light on crane column | 1.290,00 € | |
Load sensing connection for Danfoss control block | 300,00 € |
Name | Select | Price | ||||||
---|---|---|---|---|---|---|---|---|
Without drive system (standard) | 0,00 € | |||||||
powerDRIVE 2wd-II with 3,1 t thrust force | 19.760,00 € | |||||||
The hydraulic wheel hub drive powerDRIVE made by Pfanzelt offers a new dimension in terms of wheel hub drives.
Declarations depending on hydraulic oil volume and hydraulic oil pressure.
|
||||||||
powerDRIVE 4WD-II with 6,1 t thrust force | 32.300,00 € | |||||||
The hydraulic wheel hub drive powerDRIVE made by Pfanzelt offers a new dimension in terms of wheel hub drives.
Declarations depending on hydraulic oil volume and hydraulic oil pressure.
|
Name | Select | Price |
---|---|---|
2 control toggles with 2 electrical functions (stadard) | 0,00 € | |
The highest performance is achieved when the controls are perfectly ergonomic. In addition to the operating position, this is also determined by the crane controller. All Pfanzelt forestry cranes are fitted as standard with a mechanical control block, 2 control toggles and an electrical switch. This means that the individual boom movements can be easily and rapidly coordinated, without having to reach for different control levers or turning.
|
||
EHC crane control with 2 joysticks (Danfoss 8 functions) | 12.200,00 € | |
The crane can also be controlled via two separate toggle switches that are installed on a rotary seat in the tractor on at a control desk.<br/> The two Profi 1 joysticks from Danfoss allow very precise, ergonomic control. |
||
EHC crane control with wireless control panel (Danfoss PVG 32) | 12.200,00 € | |
In addition to a mechanical crane control, the crane can also be operated via an EHC controller with a cord or wireless control panel. |
||
EHC crane control with 2 joysticks (Danfoss 10 functions) | 14.600,00 € |
Name | Select | Price |
---|---|---|
Without independet oil circuit (standard) | 0,00 € | |
Independent oil supply with fixed piston pump | 4.880,00 € | |
Hydraulic oil cooler included if equipped with own oil supply 108 Liter, 200 bar |
||
Independent oil supply with fixed piston pump | 5.440,00 € | |
Hydraulic oil cooler included if equipped with own oil supply 130 Liter, 200 bar |
||
Independent oil supply with fixed load-sensing pump | 7.870,00 € | |
Hydraulic oil cooler included if equipped with own oil supply 117 Liter, 230 bar |
Name | Select | Price |
---|---|---|
Clamshell gripper Pm230 (standard) | 0,00 € | |
1.260 mm opening width |
||
4-finger gripper Pm 230 | 1.020,00 € | |
1.260 mm opening width |
||
Clamshell gripper Pm 270 | 1.730,00 € | |
1.560 mm opening width |
||
4-finger gripper Pm270 | 2.950,00 € | |
1.550 mm opening width |
Name | Select | Price | Loading crane 51100 | 0,00 € |
---|---|---|
Loading crane 5186 | -2.470,00 € | |
Loading crane 6180 | -2.400,00 € | |
Loading crane 6186 | 0,00 € | |
Loading crane 61100 | 2.650,00 € | |
Loading crane 7185 | 6.930,00 € | |
Loading crane 71100 | 9.180,00 € | |
Loading crane 5286 | -2.470,00 € | |
Loading crane 6286 | 0,00 € | |
Add-on crane Z5376 | -3.770,00 € | |
Add-on crane Z5388 | 0,00 € |
Price plus VAT without freight
Prices valid until
That's how it works:
You now have the option of having a quote sent to you or of sending the machine you want by email. Your quote will be transferred directly to Pfanzelt-Maschinenbau and processed shortly.
Any questions? Call us on +49 8860 9217 0.
Pfanzelt Maschinenbau wishes you a lot of fun with the configuration