The logLINE forwarding trailers offer powerful professional machinery for forestry contractors and transporters. The three models offer uncompromising performance and optimum cost effectiveness both in standing timber and on forwarding trails. The forwarding trailers are equipped with a heavy lift crane of the 6 or 7 mt class, optimising them for used with powerful tractors.
The L16 forwarding trailer tackles payloads of 15 metric tons in forest terrain and convinces with high output and a professional forestry crane in the 5 mt category featuring dual telescopic technology. Thanks to special 800/40 22.5“ tyres the forwarding trailer also guarantees maximum ground protection - at an external width of under 3m.
Get more information and request a non-binding offer.
The strong frame structure which is based on a torsion-resistant central spar is the basis for the excellent off-road handling properties of the Pfanzelt forwarding trailer, even when loaded. The central spar is made of fine grain steels to cope with the highest loads. Besides maximum stability, this design offers maximum ground clearance. The frame is only welded to the crane support in the front area, meaning that the strength of the central spar is not compromised.
The flat bed can be extended by up to 1,500 mm for the transport of various timber lengths by means of an integrated, extensible frame.
All stanchions can be extended laterally. The stanchion cage extension is thus 300 mm. This increases the flat bed area by 0.5 m2.
The draw bar of the logLINE forwarding trailer is available in a bottom hitch version. The bearings of the pivoting draw bar in the form of lubricatable and adjustable spherical articulated bearings ensure long-term operating safety of this component that is subject to heavy loading.
When the trailer is fitted with an independent hydraulic oil supply, the powerful piston pump is protected from damage by concealed mounting either above or below the draw bar.
Draw bar suspension/tilt
On L16 and L19 models, the trailer can be equipped with a draw bar suspension / tilt system. The steering draw bar also become a tilting device by the provision of an additional cylinder. This feature enables the flat bed to be placed in a horizontal position and the crane column vertically on slopes. During travel, this device acts as suspension, thus increasing driving safety and comfort.
Steerable draw bars<br/> Pfanzelt forwarding trailers are equipped as standard with a pivoting draw bar with a large steering angle. The maximum excursion from the centre is +/- 860 mm. Reliable operation even when the loaded rear trailer is turned uphill is assured by two powerful hydraulic cylinders. The pivoting moment is thus 35 kNm (at an oil pressure of 200 bar). The steerable draw bar is mechanically locked when driving on roads. In a one-man system this is achieved by two protective flaps.
The bogie axle of Pfanzelt forwarding trailers offers stability during crane operation and the best possible drive characteristics, especially in forwarding trails. The large pendulum travel of the bogie axle has a range of up to 360 mm. This enables that the trailer can safely drive over branches and other obstacles. The even distribution of the ground pressure is another big advantage.
For protection against damage due to driving over trunks and projecting branches, the underside of the trailer is smooth. Cables and hoses<br/> are concealed for maximum protection.
The bogie axle is mounted on lubricatable and adjustable spherical articulated bearings. This guarantees true running for many years.
Pfanzelt logLINE forwarding trailers are equipped as standard with a braking system that acts on four wheels. This braking system is pneumatically actuated. The compact diaphragm brake cylinders are completely encapsulated with a protective hood. This means that the brake system is protected from damage by branches or the gripper.
Approved for use on public highways
Travel on public roads is no problem for Pfanzelt machines, even when loaded. With the TÜV certificate, the forwarding trailer can be licensed for top speeds of 25 or 40 km/h on public roads. Depending on the equipment, a CoC document is available for 25 km/h.
LED lighting with turn signal monitoring
The lighting system using LED lights is integrated in the frame. To protect the lights when working in standing timber, these are protected by a robust plexiglass panel.
The new hydraulic wheel drive powerDRIVE made by Pfanzeltoffers a new wheel drive dimension. It is convincing in the forest and on the road.
The wheel hub drive is equipped with an electric control unit by which the driver can control the drive from the tractor's cab. This allows the operator to switch between the simple drive for forward
travel and reversing and a hill start assistance.
|2WD-II||3,1 t||8,2 km/h|
|4WD-II||6,1 t||4,1 km/h|
Data depends on hydraulic oil quantity and pressure.
Pfanzelt forestry cranes are designed for professional duty. The Pfanzelt crane range includes loading cranes in various lift classes.<br/> All Pfanzelt cranes have a larger lifting force and a higher pivoting moment to enable powerful pivoting of the crane – even uphill.
|logLINE forwarding trailers||L14||L16||L19|
|Customize your machine||Configurator||Configurator||Configurator|
|Frame construction||Central tube frame|
|Central tube size||200 x 200 x 10 mm||250 x 250 x 8 mm||350 x 250 x 8 mm|
|Frame extension||1,500 mm||1,500 mm||1,500 mm|
|Long flat bed||3,900 mm - 5,500 mm||4,500 mm - 6,500 mm||4,500 mm - 6,500 mm|
|Stanchion pairs||4 (extensible sideways by 300 mm)|
|Hydraulic pivoting draw bar with 2 cylinders|
|Pivoting moment||22.5 kNm||35 kNm||35 kNm|
|Front cage area||2.98 – 3.37 m²||3.25 – 3.75 m²||3.50 – 4.00 m²|
|Running gear||Bogie chassis, 1,210 mm wheelbase||Bogie chassis, 1,300 mm wheelbase||Bogie chassis, 1,300 mm wheelbase|
|Bogie oscillation travel||+/– 17°, +/– 180mm||+/– 17°, +/– 180mm|
+/– 17°, +/– 180mm
|Track width||1,850 mm||1,800 mm||1,900 mm|
|Load capacity on non-public roads||13.0 t||15.0 t||17.0 t|
|Permitted total weight on public highways||14.0 t||16.0 t||19.0 t|
|Dead weight with crane||approx. 4.5 t||approx. 5.5 t||approx. 6.0 t|
|Brake system||4-wheel pneumatic braking system with spring-loading|
|Dimensions||560/45-22.5" 12, PR stud profile||600/50-22.5" 12, PR stud profile||600/50-22.5" 12, PR stud profile|
|Rim flange reinforcement, spar sleeve protection|
|Loading crane||LK 6280||LK 7185||LK 7185|
|Range||7,750 mm||8,300 mm||8,300 mm|
|Lift moment net||61 kNm||70 kNm|
|Pivoting moment||25 kNm||27 kNm||27 kNm|
|Independent pneumatic oil supply with integrated load sensing pump|
|Crane control||EHC control with 2 Danfoss Profi1 joysticks|
|Clamshell gripper Pm 230|
|600/50-22.5" 12, PR stud profile||optional|
|700/40-22.5" BKT flotation 648||optional|
800/40-22,5" Vredenstein Flotation
|Draw bar tilt / spring suspension system||–||–||optional|
|EHC control with remote control unit|
|Loading crane LK 62100 (9,800 mm, 61 kNm)||optional|
|Loading crane LK 7185 (8,300 mm, 70 kNm)||optional||optional|
Loading crane LK 71100 (10,000 mm, 70 kNm)
More information including options and comparable alternatives.